Uniblock 110 Hybrid Adhesive

General UNIBLOCK 110 Superior Hybrid Adhesive 

• Uniblock 110 is designed for use on Ceramics, Engineered Stone, Granite, Marble and Quartz.

• Glue is tintable

• Excellent mechanical characteristics • Semisolid consistency for a better knife grade

•  Very good chemical resistance also on alkaline supports

•  Good adhesion on all kind of natural and artificial stone having enough porosity •

• Fast hardening (7-10 minutes) •

• Low exothermal peak for a modest shrinkage •

• Leave the surface dry without greasiness for an easy honing and polishing

• Hardening time: 7 to 10 minutes. Complete catalysis after 24 hours. Working time. 3 to 5 minutes.

HOW TO USE

The surface must be clean, dry, free from dust and grease and possibly roughened. Mix the glue carefully with 2% of catalyst / hardener. Apply within 1 to 2 minutes after mixing; cold slows down and heat speeds up the hardening time. The hardened adhesive can be worked (polished, drilled, etc.) 60 minutes after the hardening. Never pour into the can residuals of adhesive already mixed with hardener. Keep at temperature between 15℃ and 25℃(59℉ to 77℉)