Gator Stone Chiseler

Gator Stone Chiseler

The gator machine does not sit on the stone, so it can’t scratch the polished surface.

It rolls easily on the floor so you don’t have to lift the machine to the edge of the stone.

It easily adjusts to any table height from 42" to 50+"

It has four presets for stone thickness (3cm, 4cm, 6cm, 9cm) to make the cycle times faster.

Solid tungsten carbide blades.

Tray design to catch the chips and keep the floor clear.

Up to 40,000 pound of pressure make it by far the most powerful on the market

One button operation and simple positioning make the process fast.

Rubberized stops in front of the chisels (top and bottom) to avoid scratches.

Can be used without a straightedge clamped to the stone because the machine is easy to place in position to a line, and then just push a button.

Can make very straight edges or more rough by spacing the cuts differently.

The body of the machine allows it to go into a 90 degree inside corner.

  Welded ¼" wall tubing (where the hydraulic ram and chisels are mounted) which is reinforced at all stress points.  This frame does not flex when under pressure.