Lavina 13-X Edger Machine

Lavina 13-x A level on the head allows the operator to check the flatness of the floor during work. A new gage allows the operator to control the angle of the head against the floor, up to 4 degrees in each direction. This new system of adjustable head angles allows operators to blend edge work more evenly and eliminate lines. Rollers prevent the head from damaging walls, while allowing for the closest possible access to edges. Controls include a forward/reverse option. Optional water tank.

A level on the head allows the operator to check the flatness of the floor during work

• Rollers prevent the head from damaging walls, while allowing for the closest possible access to edges

• A new gage allows the operator to control the angle of the head against the floor, up to 4 degrees in each direction

• This new system of adjustable head angles allows operators to blend edge work more evenly and eliminate lines

• Controls include a forward/reverse option

• Optional water tank

Specifications:

• Horsepower 5.5HP / 4KW

• Voltage 1ph x 208-240V

• Amperage 16 Amp

• Dedicated Breaker Requirement 20 Amp

• Generator Recommendation 9 KW

• Weight of Machine 236 lbs / 107 kg

• Grinding Pressure 57 lbs / 26 kg

• Additional Weight up to 22 lbs / 10 kg

• # of Additional Weights 4 x 5.50 lbs / 2.5 kg

• Attachment Speed 500-800 rpm

• Working Width 13.2in / 335mm

• Tool Holder Diameter 13.2in / 335mm

• Tool Diameter 13.2in / 335mm

• Application wet or dry

• Dust-vacuum yes

• Water feeding (optional) pump, front spray

• Water tank capacity (optional) 5.2gal / 20L

• Cable Length 57 ft / 17.4 m

• Machine Length 47.6in / 1208mm

• Machine Width 23.6in / 600mm

• Machine Height 36.1in / 917mm

• Crate Length 55.5in / 1410mm

• Crate Width 28.7in / 730mm

• Crate Height 43.3in / 1100mm